Phonitor 2 (120V Rail Headphone Monitoring Amplifier)

Availability: In Stock

Phonitor 2 can be used as the ultimate monitor controller and preamp for three different sources.

  • 120V Rail headphone amplifier, preamplifier and monitor controller
  • For all headphones with impedances >10Ohms (>40Ohms for balanced headphones)
  • Innovative Phonitor Matrix: speaker-equivalent listening on headphones
  • Laterality control: super-fine balance control
  • Solo L/R, Polarity ø L/R, Mono/Stereo
  • Volume remotely adjustable (learns any IR remote control)
  • Maximum output power: 2 x 2W (1kHz/300Ohm)
  • Frequency response: 4Hz - 480kHz (-3dB)
  • THD+N: 0.00091% (HP), 0.00085% (Line)
  • Dynamic range: 133.62dB (HP), 134.37dB (Line)
  • XLR Input

  • Neutrik XLR, balanced, Pin 2 = (+)
  • Impedance: ca. 20 kohms
  • CMR: -82 dBu (at 1 kHz)
  • Max. Input Level: +32.5 dBu

  • RCA Input

  • RCA, unbalanced (single ended)
  • Impedance: ca. 10 kohms
  • Max. Input Level: +32.5 dBu

  • Headphone Output

  • 6.35 mm TRS connector
  • Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
  • Impedance: 0.18 Ohm
  • Damping Factor: 180 @ 40 Ohm
  • Frequency Range: 10 Hz to 300 kHz ( -3 dB)
  • Crosstalk at 1 kHz: -90 dB
  • THD&N: 0.00091 % (at 0 dBu, 1 kHz, 100 kohms load)
  • Noise (A-weighted): -103 dBu
  • Dynamic Range: 135.5 dB

  • Max. Output Power (at +30 dBu at 1 kHz)

  • 2 x 1 W at 600 Ohm impedance
  • 2 x 2 W at 300 Ohm impedance
  • 2x 3.7 W at 120 Ohm impedance
  • 2x 2.9 W at 47 Ohm impedance
  • 2x 2.7 W at 32 Ohm impedance

  • Monitor/Line Outputs

  • Neutrik XLR, balanced, Pin 2 = (+)
  • Frequency Range: 4 Hz to 300 kHz (-3 dB)
  • Crosstalk at 1 kHz: -106 dB
  • THD&N: 0.00085 % (at 0 dBu, 1kHz, 100 kohms load)
  • Noise (A-weighted) -103.8 dB
  • Dynamic Range: 136.2 dB

  • Internal Operating Voltages

  • +/- 60 V

  • Power Supply

  • Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
  • Fuses: 230 V: T 630 mA; 115 V: T 1 A
  • Power consumption: max 24 VA

  • Dimensions (incl. feet)

  • 278 mm W x 100 mm H x 335mm D
  • 10.95 in W x 3.94 in H x 11.19 in D

  • Weight

  • 4.3 kg; 9.5 lbs (unit only)
  • 5.4 kg; 11.9 lbs (shipping)